Free Proof EL Membrane Keypad For Industry Equipment
Features
-
Construction:
- Made up of several layers, including a top graphic layer, a spacer layer, and a bottom circuit layer.
- The top layer usually has printed graphics indicating the function of each key.
-
Operation:
- When a key is pressed, the top layer makes contact with the bottom circuit layer, completing an electrical circuit and registering the input.
-
Design:
- Often designed to be compact and lightweight.
- Can be waterproof or resistant to dust, making them suitable for harsh environments.
-
Customization:
- Can be easily customized in terms of layout, graphics, and key functions, making them adaptable for specific applications.
-
Cost-Effectiveness:
- Generally less expensive to produce than mechanical keypads, which makes them a popular choice for many manufacturers.
Applications
- Consumer Electronics: Used in appliances, remotes, and control panels.
- Industrial Equipment: Found in machinery and control systems due to their durability.
- Medical Devices: Common in devices that require a clean and simple interface.
- Point of Sale Systems: Used for entering data quickly and efficiently.
Pros and Cons
Pros:
- Low profile and lightweight
- Resistant to environmental factors
- Cost-effective and customizable
Cons:
- Limited tactile feedback compared to mechanical keypads
- Can wear out over time, leading to reduced responsiveness
- May not be suitable for high-frequency input applications
Membrane switch Performance Index
| Environmentl | Operating Temperature | -40°C to +80°C (-40°to 176°F) | | | Storage Temperature | -40°C to +85°C (-40°to 185°F) | | | Humidity | 40°C, 90% to 95% for 240 hours | | | Vibration | 20G's max. | | Mechanical | Actuation Force | Non-tactile 60g to 300g (2oz to 10oz) | | | | Tactile 150g to 400g (6oz to 14oz) | | | Switch Stroke | Non-tactile 0.1 to 0.5mm | | | Life Expectancy | Tactile 0.6 to 1.5mm | | | | Non-tactile >5 million actuations | | | | Tactile >1 million actuations | | Electrical | Operating Voltage | 35 volts maximum | | | Operating Current | 10 micro amps to 100 milliamps, resistive | | | Operating Power | 1 watt maximum | | | Circuit Resistance | 10 ohms to 500 ohms, dependent on size and layout | | | Insulation Resistance | 100M ohms at 100V DC | | | Dielectric Withstand | >250 VRMs (50-60Hz 1 minute) | | | Contact Bounce | ≤ 5 milliseconds | |
Product spec :
| Overlay material ---For front or face overlay |
| Polyester | Polycarbonate |
| 1 Highly versatile for embossing
2 Highly resistant for chemicals
3 Better durability
4 For internal and external use | 1 wide range of the surface finishes and thicknesses
2 More cost-effective
3 For internal and external use
4 many Lexan label choose |
| Embossing --- Graphic overlay or up circuit can be embossed in order to insert metal stainless steel domes for good tactile when press .Leave space for mechanical keys and provide tactile indications |
| Pedestal embossing | Rim embossing | Pillow embossing | Dim embossing |
| Windows or LCD --- For display functions |
| Printed colors windows such like red ,black and so on | Transparent finishes windows |
| Keys |
| Tactile Keys :witch metal domes or Poly domes ,Metal dome with different diameter and pressure kinds | Non-tactile keys: printed silver spot on the circuit |
| LEDs ---Miniature LEDs ,LED colors :white ,Green ,Red ,Blue ,Yellow ,Orange and others |
| EL and Sensors or inductors --- EL can be light any place where where you like ,and sensors can be used as LEDs |
| Cables --- is extension of circuit and communication with your device |
| Screen printing conductive silver cable | Copper plated cable /Polyimide or FPC | PCB cable |
| Types of connector --- 1 Zero insertion force(ZIF) with 0.5MM ,1.0MM,1.25MM pitch ;2 Female connector with 2.54MM pitch; 3 Male connector |
| Shielding --- For protection function |
| Gasket seal/Waterproof :protect the conductors against from the humidity and splashes | EMI/RFI/ESD Shielding: use an Aluminum foil shielding /clear ITO electrical conductive polyester to protect |
| Rear Adhesive --- Mostly use the 3M double-side mounting glue brand of USA. Also accepted others such like Lohmann and others |
| Back plate --- Use in Aluminum ,Polycarbonate ,Acrylic Or PMMA |
| Matching color --- PMS or RAL Is best ,CMYK or RGB also can be ok if you can supply PMS Or RAL |
| Standard Tolerances :+/-0.2MM |
Common membrane keypad structure choose :
Other photo show :
About ShenZhen TaiDa Menbrane switch CO.,LTD
Taida are an OEM professional specializing in designing and manufacturing membrane switch ,graphic overlay and adhesive sticker/labels with with more than 15 years experience in Shenzhen of China which are widely used in industrial,electronics,household appliance,medical equipments.we have more than 500 different customers .and most of our customer come from USA ,EU ,UK ,middle east and other famous country of world wide.Taida can supply different kinds of Membrane switch based on each client's request .
Factory Strength:
Factory Area: Over 2000 Square meters
Employee :＞ 70
R＆D
Continued quality improvement ,professional Tech support and latest design
From our R＆D department for customers’ demand or samples
Manufacturing
Strong productivity and unified producing process to ensure the fastest delivery time.
QC/QA
20% Employee are QC/QA workers ,quality Guaranteed
Dispatch Department
Power dispatch ability to ensure shipping accuracy and speed
Sales ＆ Customers
Overall ,close and long-term service,No matter in saling and after-sales
Many customers show in our company from worldwide
Product Tags:
|
|
Free Proof EL Membrane Keypad For Industry Equipment Images
|
